Shade sails are made up of two separate components, the post or frame, and the sails or canopy. We design and manufacture both components at our site on the Gold Coast. Shade sails can be designed to accommodate almost any application that requires shade and/or protection from weather.
Posts or frames are used as the structure for most applications involving shade sails or canopies in both commercial and domestic uses. Our posts and frames are custom made from galvanised steel to the exact specifications required for each individual job. Posts are made to accommodate the size and height of the shade sail or canopy design.
We paint all our frames and posts with one coat of ultra-etch primer followed by powder coating in colour of your choice.
Our shade cloth is available in many types of materials making our range suitable for virtually any application and environment. Our options are Rainbow Z-16 Shade Cloth,HVG solar block & extra block flame retardant shade cloth
We manufacture shade cloth sails with a swaged 3mm stainless steel wire around the perimeter. Seams are 6mm x 50mm double locked stitched , heavy duty corners with S/S triangles, & seat belt webbing. Sewn with PTFE thread “15 years manufacturer’s warranty”
Rainbow Z-16 Shade Cloth
83KG
182KG
Mono filament with tape filler
42 Micron
400 Denier
200 Grams per square metre
288kpa
81.23% cut out
H.V.G Shade Cloth
Warp 151N
Weft 195N
Warp 610N
Weft 1100N
High Density Polyethylene (HDPE) Unestablished
Mono yarn and tape
Produces a stable, consistent fabric
Australia
The material options available for our waterproof shade sails are DRI-Z and Ferrari 502 PVC.
During the manufacture process of our waterproof sails the seams are frequency welded and all corners of the sails are fitted with stainless steel plates top and bottom for tensioning purposes. Stainless steel wire is also installed around the perimeter and inside the edges for adjusting and tensioning.
DRI-Z Waterproof Shade Cloth
Knitted shade net of high density polyethylene SABS quality approved
Ultraviolet stabilised polyethylene
280 Grams per square meter
100KG Warp (min)
210KG Weft (min)
260kpa (min)
Test Netgid SABS 1703
Warranty 5 years limited. DRI-Z has been tested under CSIR under wind conditions in excess of 200km/h.
Ferrari 502 PVC
PVC clear blinds
Our PVC clear blinds have frequency welded seams and the perimeters have a 50mm Ferrari 502 PVC reinforcement. You can choose the colour for the zippers which get sewn onto Ferrari 502 PVC material. We can supply robes, pulleys, and tie-downs where requested.